Special Issue on Active Sensing, Safety Risk Assessment, and Advanced Control for Intelligent Chassis Systems
Submission Deadline: 31 December 2024
Guest Editors
Dr. Yan Wang, The Hong Kong Polytechnic University, China
Prof. Guodong Yin, Southeast University, China
Prof. Yang Shi, University of Victoria, Canada
Prof. Haiping Du, University of Wollongong, Australia
Prof. Lu Xiong, Tongji University, China
Prof. Lin Hu, Changsha University of Science & Technology, China
Dr. Chao Huang, The Hong Kong Polytechnic University, China
Dr. Henglai Wei, Beihang University, China
Call for Papers
-
-
Theoretical Modeling and Surface Roughness Prediction of Microtextured Surfaces in Ultrasonic Vibration-Assisted Milling
-
Automatic Miscalibration Detection and Correction of LiDAR and Camera Using Motion Cues
-
Multi-Physics Coupled Acoustic-Mechanics Analysis and Synergetic Optimization for a Twin-Fluid Atomization Nozzle
-
Experimental Study on the Electrochemical Performance of PEMFC under Different Assembly Forces
-
Overview of Rubik’s Cube and Reflections on Its Application in Mechanism
-
Defect Formation Mechanisms in Selective Laser Melting: A Review
-
A Review on Lower Limb Rehabilitation Exoskeleton Robots
-
Estimation of Road Friction Coefficient in Different Road Conditions Based on Vehicle Braking Dynamics
-
Keep Healthcare Workers Safe: Application of Teleoperated Robot in Isolation Ward for COVID-19 Prevention and Control
Featured article: Biological Stability of Water-Based Cutting Fluids: Progress and Application
The application of cutting fluid in the field of engineering manufacturing has a history of hundreds of years, and it plays a vital role in the processing efficiency and surface quality of parts. Among them, water-based cutting fluid accounts for more than 90% of the consumption of cutting fluid. However, long-term recycling of water-based cutting fluid could easily cause deterioration, and the breeding of bacteria could cause the cutting fluid to fail, increase manufacturing costs, and even endanger the health of workers. Traditional bactericides could improve the biological stability of cutting fluids, but they are toxic to the environment and do not conform to the development trend of low-carbon manufacturing.
Read the full article hereAims and scope
Chinese Journal of Mechanical Engineering (CJME) was launched in 1988. It is a peer-reviewed journal under the govern of China Association for Science and Technology (CAST) and sponsored by Chinese Mechanical Engineering Society (CMES).
As the only official journal of CMES, CJME has been one of the top journals in Mechanical Engineering in China, aiming to become a world-class one. On behalf of CMES, CJME serves for international communication among over 80 international societies/institutions, such as American Society of Mechanical Engineers (ASME), Institution of Mechanical Engineers (IMechE), and International Federation for the Promotion of Mechanism and Machine Science (IFToMM), etc.
CJME welcomes original research articles, reviews, letters, research highlights, and editorials.
The publishing scopes of CJME follow with:
 Mechanism and Robotics, including but not limited to
 -- Innovative Mechanism Design
 -- Mechanical Transmission
 -- Robot Structure Design and Control
 -- Applications for Robotics (e.g., Industrial Robot, Medical Robot, Service Robot…)
 -- Tri-Co Robotics
 Intelligent Manufacturing Technology, including but not limited to
  -- Innovative Industrial Design
 -- Intelligent Machining Process
 -- Artificial Intelligence
 -- Micro- and Nano-manufacturing
 -- Material Increasing Manufacturing
 -- Intelligent Monitoring Technology
  -- Machine Fault Diagnostics and Prognostics
 Advanced Transportation Equipment, including but not limited to
 -- New Energy Vehicle Technology
 -- Unmanned Vehicle
 -- Advanced Rail Transportation
 -- Intelligent Transport System
 Ocean Engineering Equipment, including but not limited to
 --Equipment for Deep-sea Exploration
 -- Autonomous Underwater Vehicle
 Smart Material, including but not limited to
  --Special Metal Functional Materials
  --Advanced Composite Materials
  --Material Forming Technology
Associated Society
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.
Annual Journal Metrics
-
2022 Citation Impact
4.2 - 2-year Impact Factor
3.9 - 5-year Impact Factor
1.546 - SNIP (Source Normalized Impact per Paper)
0.744 - SJR (SCImago Journal Rank)2023 Speed
43 days submission to first editorial decision for all manuscripts (Median)
431 days submission to accept (Median)2023 Usage
814,514 downloads
17 Altmetric mentions -
This journal is indexed by
• Google Scholar
• EBSCO
• EI Compendex
• SCImago
• SCIE
• UGC-CARE List (India)
• Dimensions
• DOAJ
• Astrophysics Data System (ADS)
• ProQuest
• Chinese Academy of Sciences (CAS) - GoOA
• Naver
• CNKI
• Chinese Science Citation Database
• OCLC WorldCat Discovery Service
• Chemical Abstracts Service (CAS)
• TD Net Discovery Service
• SCOPUS
• INSPEC
• CNPIEC
- ISSN: 2192-8258 (electronic)
- ISSN: 1000-9345 (print)